Anden 5771 MERV 11 Replacement Filter for Anden A95 - 10 x 12 x 1

Anden A95 Filter Size: 10 x 12 x 1, and Not the A95F The A95 and the A95F are a letter apart on the data plate and a panel apart in the filter frame. Part 5771 is 10 x 12 x 1 for the A95. The A95F takes part 5770 at 12 x 12 x 1 instead. Two inches on a single edge is enough that the wrong one will not seat properly. A filter that does not seal is a filter the air goes around instead of through. So the first job is the letter on the plate, not the number. Get that right and the rest is simple: one machine, one panel, part 5771. What a MERV 11 Panel Does for an Anden A95 Only one panel in Anden's dehumidifier range is smaller than this one, the A70's. A small face has the least media to work with, which makes staying on top of it worthwhile. MERV 11 is rated at 65 percent or better capture from 1 to 3 microns, and 85 percent from 3 to 10. That is the fraction a grow room throws about: leaf dust, trimmed material, grit off the media. Anden builds it as a multi-pleat, folding the media to get more surface into a small frame. What sits behind it is the evaporator coil. Keeping that face clean is the difference between a machine holding its rated pints and one working harder for fewer. The timing is the same across the whole line, and it suits a grower better than most. Change the filter every 12 weeks, or at the end of a harvest. Key Features Anden part 5771: The number to match, one panel per unit 10 x 12 x 1: The size for this part Not the A95F panel: The A95F takes part 5770 at 12 x 12 x 1; check the letter on the data plate before matching a size MERV 11 multi-pleat media: Rated at 65 percent or better from 1 to 3 microns and 85 percent from 3 to 10 Folded media in a small frame: The multi-pleat build puts more surface into one of the smallest frames in the Anden range, which is where it counts most Keeps the coil clean: A loaded face makes the unit draw full power for fewer pints, so fresh media is the simplest way to hold output Every 12 weeks or every harvest: An interval tied to the grow cycle rather than to a calendar quarter Technical Specifications Specification Value Anden part number 5771 Filtration grade MERV 11 Media type Multi-pleat Size 10 x 12 x 1 in Filters per unit 1 Compatible models Anden A95 Often confused with Anden 5770, 12 x 12 x 1, for the A95F Replacement interval Every 12 weeks or at the end of a harvest More on how Quest and Anden size their filters, what the MERV numbers mean and when each brand says to change them: Quest and Anden Filters: Sizes, Ratings and Replacement Timing.