Auto Cure Automated Curing Unit - Large

The Automated Curing System That Vents Itself A 32 cubic foot chamber holds 20 to 25 lb of dry flower on perforated trays. The acrylic shell is welded rather than glued, so nothing off-gasses into the load. Stainless latches pull a rubber-lined door tight against its seal. Two fixed probes read humidity and temperature from inside that sealed space. Readings land on a 7 in touchscreen mounted above the chamber. Three sliders set cycle frequency, humidity ceiling and vent duration. The machine then opens its own vents on whichever threshold trips first. A manual cycle button vents on demand when you want to check the load. Every vent event is written to a log you can pull from the autocure.us portal. Strain notes attach to each run, so two harvests can be compared later. Where Auto Curing Beats Jars and Totes Hand-burping jars is guesswork, and it breaks down at scale when a room turns out forty totes. Auto curing swaps that routine for a rule the machine follows without you standing there. Four 2.75 in fans sit in intake and exhaust flow chambers behind the unit. They move air bottom to top and side to side under slight negative pressure. Laminar flow like that reaches the middle of a tray instead of skimming the top. Dust filters cover both openings so nothing settles on the flower. Tray bases carry over two thousand holes each to keep airflow even. Steadier airflow cuts back the micro-climates where mould gets started. The large frame rides on wheels, so a full chamber still moves across a dry room. Key Features Capacity: 20 to 25 lb of dry flower per full load Chamber: 32 cu ft of welded laboratory-grade acrylic with a sealed door Display: A 7 in LCD touchscreen sits on the panel above the door Venting: Two servos and four fans handle intake and exhaust cycles Triggers: Vents on cycle frequency, humidity ceiling, or a manual command Data: Every vent cycle uploads to the secured autocure.us grower portal Airflow: Perforated tray bases spread laminar flow through the whole load Mobility: The 24 by 48 inch base rolls on casters when fully loaded Technical Specifications Specification Value Model ACACUL Capacity 20 to 25 lb dry weight Chamber volume 32 cu ft Footprint 24 x 48 in, with wheels Chamber material Laboratory-grade acrylic, welded without adhesives Door Rubber-lined, stainless steel latches Display 7 in LCD touchscreen Sensors Fixed humidity and temperature probes inside the chamber Fans Four 2.75 in ventilation fans Servos Two heavy-duty venting servos Airflow Laminar, bottom to top, under negative pressure Filtration Dust filters on intake and exhaust openings Trays Perforated bases, over 2,000 holes each Controls Cycle frequency, humidity ceiling, vent duration, manual cycle Data logging Secured online portal at autocure.us Other sizes Medium holds 8 to 12 lb in 8 cu ft