Bluelab pH Probe KCl Storage Solution 100/120 mL | Probe Hydration

What Bluelab KCl Storage Solution Is Actually Replacing This is the potassium chloride solution a Bluelab pH probe is stored in. Every time the probe reads, a small amount of that chloride migrates out through the reference junction, and the internal chemistry drifts as that happens. Storing the tip in matching KCl solution puts back what the junction gave up. That is the whole mechanism, and it is why a probe stored wet reads stable for years while an identical probe stored dry fails early. Bluelab put it more bluntly than we would: if it dries, it dies. Why a KCl Solution for pH Meter Storage Beats Water Plain water seems like the obvious substitute and it is the wrong one. RO and distilled water pull potassium chloride out through the junction, thinning the ionic strength the reference system depends on. De-ionized water is worse again, drawing electrons out of the probe and accelerating instability. The routine is simple. Fill the storage cap after each use and check weekly for evaporation. If mould appears, empty the cap, rinse it and refill. One thing worth stating plainly, because people reach for the wrong bottle. This is storage and hydration solution, not calibration solution. Calibrating still needs pH 4.0 and 7.0 sachets. Key Features Replaces KCl lost through the reference junction: Puts back the potassium chloride that migrates out during normal readings, keeping the reference stable. Made to laboratory standards for Bluelab probes: Formulated to match the internal chemistry of Bluelab pH pens and probes rather than a generic fill. Keeps the bulb and junction wet: A probe stored dry fails early, which is the most common way a working meter gets retired. Faster response time: A properly hydrated junction settles on a reading instead of drifting while you wait. Storage cap routine, not a soak: Fill after use, check weekly for evaporation, refresh if mould appears. Technical Specifications Specification Value Type pH probe storage and hydration solution Active Potassium chloride (KCl) Sizes 100 mL / 120 mL For Use With Bluelab pH pens and pH probes Use After Each Reading Fill the storage cap to keep the tip wet Weekly Check for evaporation and top off If Mould Appears Empty, rinse the cap and refill Not For Calibration - use pH 4.0 and 7.0 solutions Standard Manufactured to laboratory standards