
In Stock
CenturionPro Quantanium Dry Tumbler | 30 in, 1/4 in Slot
☆☆☆☆☆
$1,017.53
Which Machines Take the CenturionPro Quantanium Dry Tumbler
Three of them: the Original, the Silver Bullet and the Gladiator. All three run the 30 in barrel. The Mini takes a shorter 28 in part, so the two do not swap.
Purchase directly from Growers HouseWhich Machines Take the CenturionPro Quantanium Dry Tumbler
Three of them: the Original, the Silver Bullet and the Gladiator. All three run the 30 in barrel. The Mini takes a shorter 28 in part, so the two do not swap. Under the coating is 16 gauge 304 stainless at 6.5 in across, with the 1/4 in slot pattern. Nothing else in the line uses it.
Sizing a Replacement Tumbler Barrel for a Gladiator
Count them first. The Original and the Silver Bullet run one barrel each. The Gladiator runs two side by side, so a full spare set there is two of these rather than one. Throughput follows the machine, not the part. The Original and Silver Bullet move 50 lbs an hour wet and 10 dry. The Gladiator does 75 and 15. Each barrel is hand made, and blade alignment sometimes wants a small calibration on first fit. Two things worth knowing before it ships. CenturionPro moved to a dual purpose hybrid build in 2020 and now points most rooms at that instead. This dry only barrel is made to request. And its 10 year machine term does not reach tumblers, which are consumables.
Key Features
Fits three machines: Original, Silver Bullet and Gladiator, all on the 30 in barrel.
Not a Mini part: The Mini runs a shorter 28 in barrel. The two are not interchangeable.
A Gladiator needs two: It runs a pair side by side, so one barrel is half a spare set.
1/4 in slot, dry build: The slot pattern CenturionPro cut for material trimmed after drying.
Quantanium on 304 stainless: A PPG reinforced PTFE film, PFOA free and rated FDA conforming.
Hand made, so check alignment: Blade clearance can want a small calibration on first fit.
Hybrid is the current build: CenturionPro points most rooms at the dual purpose barrel now.
Technical Specifications
Specification
Value
Brand
CenturionPro
Part Number
CP-3061
Type
Slotted tumbler barrel, dry build
Slot Width
1/4 in
Barrel Length
30 in
Barrel Diameter
6.5 in
Substrate
16 gauge 304 stainless steel
Coating
Quantanium, PPG reinforced PTFE
PFOA
Not used in the formulation
Food Contact
Rated FDA conforming
Fits
Original, Silver Bullet, Gladiator
Does Not Fit
CenturionPro Mini, 28 in barrel
Tumblers Per Machine
Original 1, Silver Bullet 1, Gladiator 2
Original Throughput
50 lbs/hr wet, 10 lbs/hr dry
Gladiator Throughput
75 lbs/hr wet, 15 lbs/hr dry
Build
Hand made, may want blade calibration on first fit
Current Line
Dual purpose hybrid, this dry build made to request
Cleaning
Soak in warm soapy water and wipe. No pressure washing
Warranty Note
Machine warranty excludes consumable tumblers






