Gavita CT 2000e LED Grow Light | 650W, 2000 µmol/s, 208-480V

Gavita CT 2000e Output, Electrical Load and Build This fixture is rated at 650W input and 2000 µmol/s of PAR output, which works out to 3.0 µmol/J. The driver accepts 208–480V at 50/60 Hz. Current runs 3.125A at 208V, 2.35A at 277V and 1.35A at 480V, with a power factor above 0.90. Those numbers let an electrician size a lighting panel before the fixtures arrive. Each unit adds about 2,218 BTU/hr to the room, so HVAC planning should start from that figure. The housing measures 24.6 x 12.1 x 5.3 in and weighs 34.5 lb. That compact footprint hangs from the included wire hangers or a Unistrut bracket. It is rated IP65 for indoor wet locations and runs in ambient temperatures from 0 to 40°C. The spectrum is broad white with enhanced blue, so one fixture carries a crop from veg through flower. Listings cover UL 8800, UL 1598, UL 8750 and CSA C22.2, and Gavita backs it with a 5-year limited warranty. Replacing HPS with a Compact LED Toplight A compact led toplight earns its keep in rooms already laid out for double-ended HPS. Gavita built the CT to hang where the old reflectors hung, with a light throw close to what the crop is used to. Its flower footprint is roughly 4x4 to 5x5 ft per fixture. Expect less radiant heat at the canopy than with HPS, so leaf temperature will drop at the same air setting. Many growers raise room temperature a couple of degrees after the switch to keep transpiration on track. Watch the first run closely and log runoff, because plants under LED often drink less. Dimming runs from 35 to 100 percent through the EL3 Master Controller, sold separately, over 0–10V and RJ45 links. That lets one controller ramp a whole room at sunrise and pull it back if tops start to bleach. Budget for the controller when you plan the room, since dimming depends on it. It is overkill for a home tent, where commercial input voltage rarely matches the wiring. Key Features High output per fixture: 2000 µmol/s from 650W for commercial flower rooms. Broad 208–480V driver: One model covers 208V, 277V and 480V commercial service. HPS-style footprint: Hangs in existing DE layouts with a compact body and HPS-like light throw. EL3 room control: Dims from 35 to 100 percent with the Gavita Master Controller over 0–10V and RJ45. IP65 wet location: Tolerates wash-downs and humid flower rooms. 5-year warranty: Limited warranty from Gavita. Technical Specifications Specification Value Model CT 2000e, 208–480V (HGC906415) Input Power 650W PPF 2000 µmol/s Efficacy 3.0 µmol/J Spectrum Broad white with enhanced blue Growth Phase Full-cycle (veg and flower) Input Voltage 208–480V, 50/60 Hz Current 3.125A @ 208V, 2.35A @ 277V, 1.35A @ 480V Power Factor > 0.90 Heat Load 2,218 BTU/hr Dimming 35–100% with Gavita EL3 Master Controller (sold separately) Control Interface 0–10V (EIA-485), RJ45 Dimensions 24.6 x 12.1 x 5.3 in Weight 34.5 lb (15.6 kg) IP Rating IP65, indoor wet location Ambient Temperature 0–40°C Mounting Wire hangers and Unistrut bracket included Certifications UL 8800, UL 1598, UL 8750, CSA C22.2 No. 250.0 / 250.13 Warranty 5 years limited