General Hydroponics FloraKleen | Clearing Solution for Hydro, Coco and Soil – 1 Gallon

What General Hydroponics FloraKleen Actually Does Salts accumulate quietly over a run. Every feed leaves a little behind in the lines, on the media and around the root zone. Past a certain point that residue starts locking nutrients away instead of delivering them. FloraKleen is a clearing solution rather than a feed. It goes in to dissolve what has collected and carry it out, which is a different job from anything on your feed chart. One rule governs the whole thing. It runs on its own, with no base nutrients in the tank alongside it. Adding it to a working reservoir defeats the point, because you are then flushing salts out with more salts going in. Drain first, then mix it into fresh water. Rates for a Flushing Solution in a System or a Pot Three jobs, three rates. For monthly maintenance, one to two teaspoons per gallon of fresh water. In a system, run that for one to two hours, then drain and refill with fresh nutrients. In soil or coco, mix the same rate in a watering can and drench until it runs from the bottom. Normal feeding resumes at the next watering. Heavy buildup takes more, up to about 38 mL per gallon. For a final flush, two teaspoons per gallon for the last one to two days before harvest. It is safe to use while plants are actively growing, so a correction does not have to wait for a gap in the schedule. Key Features A clearing solution, not a feed: It dissolves accumulated residue rather than adding anything to the plant. Runs on its own: No base nutrients in the tank. Drain first, then mix it into fresh water. 1 to 2 tsp per gallon: The monthly maintenance rate, in a system or in a watering can. One to two hours in a system: Then drain and refill with fresh nutrients and carry on. Drench to runoff in media: In soil or coco, water it through until it comes out of the bottom. Up to 38 mL per gallon: The heavier rate where salt buildup has already gone a long way. Two teaspoons for a final flush: Run it through the last one to two days before harvest. Safe while plants are growing: A correction does not have to wait for a gap in the feed schedule. Works across media: Hydroponic systems, coco, soilless mixes and potting soil alike. Technical Specifications Specification Value Brand General Hydroponics Part Number 732920 / 732925 / 732930 Product FloraKleen clearing solution Type Salt and fertilizer residue clearing solution Use With Nutrients No. Run standalone in fresh water Maintenance Rate 1 to 2 tsp per gallon, monthly System Method Run 1 to 2 hours, then drain and refill with fresh nutrients Media Method Drench in a watering can until runoff, then resume feeding Heavy Buildup Rate Up to about 38 mL per gallon Final Flush Rate 2 tsp per gallon, last 1 to 2 days before harvest During Growth Safe to apply while plants are actively growing Suitable Media Hydroponic systems, coco, soilless mixes, potting soil Sizes 1 gallon, 2.5 gallons and 6 gallons Coverage, 1 Gallon About 384 gallons of flush at 2 tsp per gallon Coverage, 2.5 Gallons About 960 gallons of flush at 2 tsp per gallon Coverage, 6 Gallons About 2,304 gallons of flush at 2 tsp per gallon