Growonix Quartz sleeve for 6 GPM UV systems

GrowoniX UV-6 Quartz Sleeve Replacement The quartz sleeve is the clear barrier between the UV-C lamp and the water moving through the chamber—it keeps the lamp dry while letting germicidal UV pass into the flow. This is the factory replacement quartz sleeve for the GrowoniX UV-6, the 6 GPM stainless steel UV system. Over time the sleeve scales, clouds, or cracks, and a fouled sleeve blocks UV before it reaches the water, so keeping a fresh one on hand keeps disinfection performance where it should be. A Replacement Part That Restores UV Transmission Plan to inspect the sleeve whenever you change the UV lamp, and swap it if you see mineral film, fogging, or any chip in the glass. Handle the new sleeve with clean gloves—skin oils leave a residue that bakes onto the glass and cuts UV throughput. With the system powered down and depressurized, the old sleeve slides out and the replacement drops into the same chamber, restoring full clarity for the lamp to work through. Key Features UV-6 Replacement Sleeve: Factory quartz sleeve for the GrowoniX UV-6 6 GPM UV system. Quartz Construction: Transmits germicidal UV-C while keeping the lamp dry and isolated from water. Restores UV Output: A clear sleeve lets the lamp deliver full dose; a fouled one blocks it. Drop-In Fit: Slides into the existing UV-6 chamber—no system changes needed. Routine Maintenance Part: Inspect and replace alongside scheduled lamp changes. Technical Specifications Specification Value Part Type Replacement quartz sleeve Material Quartz Fits in System GrowoniX UV-6 (6 GPM UV system) Function Houses UV-C lamp; transmits UV into water flow SKU UV-6-SS-QS