HydroLogic Evolution Wall Mount Bracket | Stainless, RO1000

What the Evolution Wall Mount Bracket Holds A filter stack, off the floor. It measures 11.375 by 4.25 by 6.1875 in and weighs 1.122 lbs. It replaces the older HL 10057 part. Why Heavy Duty Stainless Suits the Wall Behind an RO Unit That wall gets wet and stays wet. Plated steel rusts there, which is the whole reason for the material choice. The more important number is not the bracket though. It is what the bracket is screwed into. Full of water an Evolution stack weighs far more than the bracket does. The fixing carries the job: find studs, or use anchors rated well past the loaded weight. Screws and washers come in the box, which is worth knowing because the ones most people reach for are plated. Wall anchors are not included, since the right anchor depends on what you are drilling into. HydroLogic describes the part as mounting an Evolution-RO to a variety of surfaces rather than naming one model. It is not tied to the RO1000 alone. Key Features Gets the system off the floor: Wall mounted, which is usually where an RO stack belongs. Heavy duty stainless: The wall behind an RO unit stays wet. Plated steel does not last. Screws and washers included: The fasteners most people would otherwise grab are plated steel. Replaces HL 10057: The older bracket part number, superseded by this one. Not RO1000 only: HydroLogic describes it as mounting an Evolution-RO generally. Anchors are not included: The right anchor depends on the wall, so that choice is yours. Dimensions: 11.375 by 4.25 by 6.1875 in. Technical Specifications Specification Value Brand HydroLogic Part Number HGC741585 Supersedes HL 10057 Material Stainless steel, heavy duty Dimensions 11.375 W x 4.25 H x 6.1875 D in Weight 1.122 lbs In The Box Bracket, screws and washers Wall Anchors Not included Fits Evolution-RO systems Mounting Note Fix to studs or anchors rated past the loaded system weight