iLuminar - TOUCH+ (PLUS) Controller

A dual-zone lighting controller for LED, CMH, and HPS The Touch+ splits into two independent zones, each running up to 60 fixtures for 120 total. Each zone holds its own schedule for a separate room or bench. It works across LED, CMH, and HPS, dimming HID from 50 to 115% and LED from 20 to 100%. Sunrise and sunset simulation ramps lights gradually to ease plants through each transition. Growers set both zones on the LCD touchscreen, and battery backup keeps the settings through a power outage. Temperature safety on the Touch+ Controller Two temperature inputs, one per zone, feed automatic shutdown that cuts a zone's lights if it overheats. At 1.1 lbs and just over four inches wide, it mounts almost anywhere near the fixtures. The kit includes the controller, an RJ9-to-RJ14 cable, and dual temperature probes. One note: it is a lighting controller, so climate gear like fans or dehumidifiers runs on a separate environmental controller. Key Features 120 Fixtures, Two Zones: Runs up to 60 fixtures per zone, 120 total, on separate schedules. LED / CMH / HPS: Dims HID 50-115% and LED 20-100% across mixed fixtures. Sunrise/Sunset Simulation: Ramps lights up and down to ease each transition. Dual Temperature Inputs: One probe per zone for zone-specific monitoring. Auto Temperature Shutdown: Cuts a zone's lights if the room overheats. LCD Touchscreen + Backup: On-unit screen with battery backup for saved settings. Compact Build: 1.1 lbs and 4.21 inches wide for easy mounting. Technical Specifications Specification Value Max Fixtures 120 (60 per zone) Zones 2 independent Fixture Support LED, CMH, HPS Dimming HID 50-115%, LED 20-100% Temperature Inputs 2 (one per zone) Safety Auto temperature shutdown Display LCD touchscreen, battery backup Operating Range 70-120 degrees F, <90% humidity Dimensions 4.21 x 2.91 x 1.22 in Weight 1.1 lbs In the Box Controller, RJ9-to-RJ14 cable, dual temp probes