Matrix M12 Daisy Chain/A4 – 15 ft

Matrix M12 Daisy Chain Cable (A4): 4-Pin Connectivity for Matrix LED Systems The Matrix M12 A4 daisy chain cable covers the specific connection points in Matrix LED systems that call for a 4-pin A4 interface rather than the 3-pin A3 configuration — use the right cable for the right connector, and the chain stays clean. The M12 twist-locking collar seats mechanically at both ends, which means the connection stays put through humidity cycles, vibration, and the general movement of a working grow room where a push-fit cable would work loose over time. Moisture-resistant construction throughout handles the condensation and high-humidity conditions common in indoor cultivation without degrading the jacket or corroding the contacts. 10ft and 15ft Runs Built for Matrix LED Grow Room Conditions Two lengths handle the range of daisy-chain span requirements without compromise — the 10ft version suits tight overhead layouts where fixtures are close together, while the 15ft covers wider fixture spacing and longer bay runs. Both plug-and-play on both ends with no tools, no adapters, and no configuration needed. The A4 cable works within the broader Matrix M12 cable ecosystem alongside other cable types, so you can spec the right connection for every point in a Matrix LED or Hybrid installation without mixing incompatible interfaces. Key Features A4 4-Pin Connector Configuration: Wired specifically for Matrix LED connection points that require a 4-pin A4 interface — not interchangeable with the A3 variant, so the system stays correctly wired from fixture to fixture. M12 Twist-Lock Retention at Both Ends: Mechanical locking keeps the connection established through vibration, humidity swings, and the continuous operation cycles that would loosen a friction-fit cable over time. Moisture-Resistant Jacket and Contacts: Built for high-humidity grow environments where standard cable materials absorb moisture, corrode contacts, and pull signal quality down across the daisy chain. 10ft and 15ft Length Options: Covers tight fixture clusters and wider bay layouts — pick the length that fits the room rather than dealing with excess slack or a cable that comes up short. Part of the Matrix M12 Cable Ecosystem: Works alongside A3 and other Matrix M12 cable types to handle every connection point across Matrix LED and Hybrid installations in a single, compatible system.