STM Cone Lander | Pre-Roll Cone Loading Machine | 72 in 2-3 sec

Cone Lander Pre-Roll Cone Loading Machine The Cone Lander loads a full 72-count tray of empty cones in 2 to 3 seconds. By hand, that same tray takes 1.5 to 2 minutes. Drop an STM 72-count tray into the drawer, close the door, and push the cycle button. It handles one cone size per machine across 84mm, 98mm, and 109mm. Running more than one size means a second unit set for that size. Fitting a Cone Loader Into Your Workflow The Cone Lander feeds STM's One-Tray workflow, so a loaded tray moves straight to a RocketBox or Mini-RocketBox for filling. It loads full stacks of cones right from the box, which cuts handling and mis-loads. It runs best with Zig Zag cones; other brands work but at a lower success rate as diameters vary. Built in the USA, it carries a 1-year parts and labor warranty. Key Features 72 cones in 2-3 seconds: Loads a full tray in seconds instead of 1.5-2 minutes by hand. One-button cycle: Load the tray, close the door, and push the cycle button. Size-specific loading: Set for one cone size across 84mm, 98mm, or 109mm. Best with Zig Zag: Highest success rate with Zig Zag cones; other brands vary. One-Tray workflow: Feeds the same 72-count tray straight to a RocketBox or Mini-RocketBox. Made in USA: Backed by a 1-year parts and labor warranty. Technical Specifications Specification Value Loading Speed 72-count tray in 2-3 seconds Tray STM 72-count Cone Sizes 84mm, 98mm, 109mm (one size per machine) Best With Zig Zag brand cones Operation Drawer-load, close door, push cycle Origin Made in USA Warranty 1 year (parts and labor)