ThinkGrow Aero-Fan V-10 10 in Inline Duct Fan | 971 CFM, 100-277V

Aero-Fan V-10 Moves 971 CFM With TrolMaster Speed Control Exhaust and intake fans run around the clock, so control and efficiency matter as much as raw airflow. The V-10 is the 10-inch model in the Aero-Fan line from TrolMaster. It moves up to 971 CFM against a maximum static pressure of 956 Pa. Peak draw is 268W at 2.7A, and the motor autosenses 100–277V at 50/60Hz. The impeller has 10 blades and fits a 250 mm (9.84 in) duct connection. Aero-Fan uses EC motors, which TrolMaster describes as more efficient and longer lasting than standard motors. The housing is rated IP44, and the fan has built-in thermal protection. It runs from -4 to 140°F, with a rated mean time to failure of 50,000 hours. The fan body measures about 15.31 × 11.26 × 9.70 in. It is certified to UL 507 and CSA C22.2 No. 60335 and carries the ETL mark. Installing a 10 Inch Inline Duct Fan The fan body releases from its frame with clips, so the bracket can be mounted first. Mark the hole positions, fasten the mounting bracket, then lock the fan body back in place. The manual calls for mounting at least seven feet above the floor. Check the airflow arrow so the fan pushes air in the right direction before connecting ducting. The tech sheet lists ECS-7 and ECS-9 cable sets in the box, though the manual lists the ECS-9 as sold separately. A Hydro-X Pro (HCS-2) can run a fan group directly over an ECS-9 connection. The FRC-1 Smart Fan Remote adds a manual knob and display, and any adjustment holds for thirty minutes before the controller resumes. The simpler FRC-2 dimmer sets group speed with a single knob. Several fans can share one controller group so a room ramps up and down together. For more airflow, the V-12 is the next step up in the Aero-Fan range. The tech sheet and user manual attached below include the airflow pattern and full safety notes. Key Features 971 CFM: Up to 956 Pa static pressure for filters and long duct runs. Autosensing 100–277V: One fan covers common commercial voltages. TrolMaster Control: Runs from a Hydro-X Pro, FRC-1 remote or FRC-2 dimmer. EC Motor: Built-in thermal protection and a 50,000 hour MTTF rating. Tool-Light Mounting: Clip-release body with a separate mounting bracket. Technical Specifications Specification Value Part number V-10 Duct size 10 in (250 mm (9.84 in) connection) Max airflow 971 CFM Max static pressure 956 Pa Rated input power 268W max Rated current 2.7A max Input voltage 100–277V~, 50/60Hz Blades 10 Housing Standard IP rating IP44 Operating temperature -4–140°F MTTF 50,000 hours (77°F) Fan dimensions 15.31 × 11.26 × 9.70 in Net weight 14.33 lbs Package size 17.52 × 16.34 × 13.58 in Shipping weight 20.39 lbs Certifications UL 507, CSA C22.2 No. 60335, ETL Package contents Fan, ECS-7 cable set, ECS-9 cable set (per tech sheet)