ThinkGrow Model-I LED Grow Light 720W, 347-480V | 1,829 µmol/s, Commercial

ThinkGrow Model-I 480V for High-Voltage Commercial Rooms Large cultivation buildings usually bring in 480Y/277V three-phase service, and Canadian sites often run 600Y/347V. This version of the Model-I wires straight onto those circuits through an auto-sensing 347–480V driver. No step-down transformer sits between the panel and the lights. At that voltage it draws only 2.09A at 347V and 1.55A at 480V. On a 20A branch at the 80% continuous rule, that is ten fixtures per circuit at 480V. A 120V build using the standard Model-I would need a separate circuit for every two lights. Output is more than 1,829 µmol/s from 720W, an efficacy above 2.54 µmol/J. The single V-shaped bar measures 45.24 x 4.36 x 6.46 in, weighs 22.33 lbs and holds its driver inside. Coverage is 4 x 4 ft in flower and 5 x 5 ft in veg, hung more than 2.5 ft above canopy. The housing is IP66, with an L90 life above 54,000 hours and a 5-year warranty. Why 480V LED Grow Lights Pay Off in a Large Build Fewer amps per fixture means fewer home runs, smaller conductors and fewer breakers across a big flower room. That is where most of the savings land, in the electrical rough-in rather than on the monthly bill. The fixture itself behaves exactly like its lower-voltage twin once it is hung. White with some UV carries the crop, and a separate far-red channel handles end-of-day treatments late in flower. That channel stays idle until a TrolMaster Hydro-X with an LMA-T adapter is on the network. The slim bar casts little shadow, so it also suits greenhouses with high-voltage service. It needs that tall hang to spread evenly, which rules out tight vertical racks. The honest limit is the building itself. This driver will not run on household or 208–240V service at all. Rooms without high-voltage panels should choose the standard-voltage Model-I instead. Key Features Auto-Sensing 347-480V Driver: Connects to 480Y/277V or 600Y/347V building service with no step-down transformer. Low Amp Draw per Fixture: More fixtures per branch circuit means fewer home runs and smaller conductors across the room. Over 1,829 µmol/s at 2.54 µmol/J: Covers a 4x4 flowering canopy or a 5x5 veg area from one 720W bar. V-Shaped Bar with Built-In Driver: One slim fixture with nothing remote to mount, and very little shadow under greenhouse glass. UV in the White + Far-Red Channel: A sunlight-like base spectrum plus far red for end-of-day flowering treatments via Hydro-X. IP66 Housing: Rated for humid flower rooms, spray drift and washdown between crops. Technical Specifications Specification Value Model Model-I, 347-480V Input Power 720W PPF >1,829 µmol/s PPE >2.54 µmol/J Spectrum Full spectrum with UV + separate far red channel Coverage Flower 4 x 4 ft / Veg 5 x 5 ft Input Voltage 347-480V auto-sensing Amperage 2.09A @ 347V / 1.55A @ 480V Power Factor ≥90% Mounting Height >2.5 ft above canopy Heat Output About 2,457 BTU/h Dimensions 45.24 x 4.36 x 6.46 in Weight 22.33 lbs Driver Built-in IP Rating IP66 Control TrolMaster Hydro-X via LMA-T adapter Lifetime L90 >54,000 hrs Warranty 5 years standard