TrimIT Pro Dry 5000 Dry Trimming Machine | 4 lb Barrel, 15-Min Timer

TrimIT Pro Dry 5000 Tumble Trimmer With a 4 lb Barrel This is a batch tumble trimmer sized for medium harvests, with a barrel that holds up to 4 lbs of stemless dried flower. Fill it about three quarters full with the unit standing vertical, close the lid and pin it horizontal to run. A built-in 15-minute timer runs the batch and switches the machine off at zero. Tilt adjusts through 8 positions, which changes how long buds roll against the blade on each turn. It runs on standard 120V household power. The housing is stainless steel on a powder-coated steel stand, so it wipes down quickly and handles use outdoors or in a barn. Double plexi shields held by magnets keep hands away from the moving barrel. Two blades come with it. A 304 stainless blade handles everyday trimming, and a flexible engineered polymer blade gives a gapless, oilless cut. That polymer blade meets FDA and USDA guidelines for food contact. The barrel lifts off for cleaning without tools beyond a wrench. Setting Up the Dry Trimming Machine for Each Harvest Blade contact decides the finish. For a gentle, oil-free trim, set the blade so most of the barrel clears it and contact happens only on the right side. For faster trimming, adjust it so the entire right side touches the blade, and add a food-grade lubricant now and then. The polymer blade is the choice for older, brittle or delicate material. Every stem must come out before using it, since stems can damage that blade and void its coverage. Swapping blades takes a few steps with a wrench. Loosen the center barrel bolt, remove the adjustment bolts and slide the barrel off while catching the keeper key. Then turn the adjustment knobs evenly so the barrel and blade stay aligned. Never force a part during reassembly. Lift the unit by its outer ring, not by the barrel, when moving it. One batch per timer cycle keeps the routine simple across a long trim day. Expect to dial in tilt and blade contact over the first few runs of each strain. Key Features 4 lb Barrel Capacity: Each batch holds up to 4 lbs of stemless dried flower, filled about three quarters full. 15-Minute Auto Timer: The built-in timer runs each batch and shuts the machine off at zero. 8-Position Tilt: Tilt adjustment changes tumble time against the blade for a lighter or closer finish. Two Blades Included: A 304 stainless blade and an FDA and USDA compliant polymer blade cover everyday and delicate trimming. Stainless Housing: Stainless steel on a powder-coated stand cleans easily and holds up to outdoor use. Magnetic Safety Shields: Double plexi shields with magnets keep the operator clear of the moving barrel. Technical Specifications Specification Value Machine type Batch tumble dry trimmer Barrel capacity Up to 4 lbs per batch Fill level About three quarters full, stems removed Timer 15-minute, automatic shutoff Tilt 8-position adjustable Blades 304 stainless steel blade; engineered polymer blade (FDA and USDA guidelines) Power 120V Housing Stainless steel Stand Powder-coated steel Safety Double plexi shields with magnets Made in North America In the box Trimmer unit with stainless blade, base, 2 stand arms, pin, 2 arm bolts, polymer blade, barrel lid, safety lid UPC 859097007726