Shop›Apogee Instruments SM-600 ePAR Guardian CEA Multi-Sensor Monitor with 5 Meter Pigtail – 5 Meter Pigtail

In Stock
Apogee Instruments SM-600 ePAR Guardian CEA Multi-Sensor Monitor with 5 Meter Pigtail – 5 Meter Pigtail
☆☆☆☆☆
$1,535.67
The Apogee Guardian is an elegant device that provides accurate measurements of important indoor environmental parameters.
Purchase directly from HydroBuilderThe Apogee Guardian is an elegant device that provides accurate measurements of important indoor environmental parameters. The SM-600 is a user-friendly datalogger with multiple integrated sensors to measure extended PAR, air temperature, humidity, vapor pressure deficit and dewpoint, CO2 concentration, barometric pressure, and daily light integral* and photoperiod* (*only accessible via Bluetooth).
Graphical summaries of these measurements can be downloaded to dataloggers via Modbus or smartphones via Bluetooth with the Apogee Connect app (iOS/Android). While the SM-600 can take measurements as a stand-alone device mounted to a mast (Apogee Instruments AM-270) or hung by thin wires, the SM-600 model is designed to integrate with and be powered by a Modbus controller. Though, data remains accessible via Bluetooth connectivity even when powered via Modbus controller.
To use this as a stand alone Bluetooth-only datalogger, please see the Apogee Instruments SM-600-AC model option, which includes a power cable for use with a standard 120VAC wall outlet.
The SM-600 is constructed from high-quality ASA plastic with low thermal conductivity and a gloss white finish in selective areas to lower emissivity. The Guardian is filled with foam to provide additional thermal insulation. The internal airway utilizes a small venturi constriction to maximize airflow efficiency over the thermistor, which minimizes the thermal boundary layers influence on temperature measurements. Simultaneously, a separate module used to measure CO2, humidity, and pressure is aspirated by a passive, low velocity airstream using a - fluid entrainment - principle. Additionally, an extended quantum sensor is mounted on the top of the shield to measure ePAR.
Apogee Instruments SM-600 Specs
Calibration Uncertainty: ± 5 %
Long-term drift (non-stability): Less than 2 % per year
Measurement Repeatability: Less than 0.5 %
Measurement Range: 0 to 4000 µmol m-2 s-1
Spectral Range: 383 to 757 nm
Field of View: 180°
Directional Response: ± 5 % at 75° zenith angles
Azimuth Angle: Less than 0.5 %
Tilt Error: Less than 0.5 %
Non-linearity: Less than 1 % (up to 4000 µmol m-2 s-1)
Response Time: Less than 1 ms
Temperature Response: -0.11 % ± 0.04 % per C
Uncertainty in Daily Total: Less than 5 %
Operating Environment: -40 to 60 C with 0 to 95 % relative humidity
Housing: White ASA housing
CO2: Range 0-2000; ± 50 ppm + 2 %
Temperature: ± 0.2 C
Humidity: Range 0-95 %; ± 3 % 20-80 %
Vapor Pressure Deficit (25 C): ± 0.08 kPa
Barometric Pressure: 70 to 110 kPa
Connectivity: Modbus (RS232 and RS485) and Bluetooth
Power Requirements: 5-32 V DC; Typical: 100 mA; Peak: 500 mA
Data Storage Capacity: 9 months of 1 min data
IP Rating: IP54 rating for harsh environments
Dimensions: 6.2 x 4.2 inches
Mass: 392 g
Cable: 5 meter, 6 conductor, shielded wire with TPR jacket and M8 connector
Warranty: 4 years against defects in materials and workmanship
Manufactured: Assembled in the USA






