Cutting Edge Solutions Mag Amped – 2.5 Gallon

Boost Chlorophyll Production And Plant Resilience Mag-Amped is a pure Magnesium product, combined with an organic surfactant that helps with uptake and overall solubility. Magnesium promotes synthesis of chlorophyll, activates transcription of proteins and enzymes needed for plant growth, promotes root development, and increases the plant’s ability to tolerate low temperatures. The increased chlorophyll production staves off issues pertainin to low light levels. Mag-Amped also provides sulfur, a necessary micronutrient for optimal plant growth and crop production. At higher concentrations, Mag-Amped™ can quickly correct magnesium deficiency. Mag-Amped is formulated for use in hydroponics, soilless, continuous feed, drain to waste, and for use in soil. Mag-Amped also works great as a foliar spray! Commercial and small sizes available: 1 Quart 1 gallon 2.5 gallon 6 gallon 15 gallon 55 Gallon Drum 270 gallon tote. *Please expect a 2-week lead time on placing commercial-sized orders. Guaranteed analysis Magnesium (Mg) 1% Sulfur (S) 1% Derived from Magnesium Sulfate Mixing Instructions For hydroponics or foliar feeding: For visible magnesium deficiency: 2 ml Mag-Amped™ per gallon of water 5 ml Mag-Amped™ per gallon of water Direction for use: This is a highly concentrated solution. Never mix undiluted concentrates , as this may result in nutrient lock-up. Add each nutrient consecutively, allowing ample time for each concentrate used to thoroughly dilute and mix into the water. If preparing a nutrient stock tank, to be used over a period of time exceeding 24 hours, you must aerate nutrient reservoir regularly. Mag-Amped is formulated for use with Cutting Edge Solutions products or other commercial hydroponic nutrients. Shake well and measure carefully using a milliliter measuring cup. If using Micro 6-0-0™, add Micro 6-0-0™ first to water, then other nutrients. After nutrients are mixed in water, adjust pH to 4.5-6.5. If your pH naturally falls within these parameters, pH adjustment is not necessary. Monitor ppm and EC in reservoir and top off with fresh water as needed. Reservoir temperature should be 60-68 degrees F. Do not store product in direct sunlight. Do not freeze.