Cutting Edge Solutions Micro – 55 Gallon

Help your garden reach new heights by providing a strong foundation of Micro Nutrients. Micro 6-0-0 is the constant through Cutting Edge Solutions Base Family. Micro is to be used in conjunction with the Grow 2-1-6 and/or Bloom 0-6-5 in order to achieve a solid fertilizer base which can be used on it's own, or built on with CES additives to achieve maximum growth. Micro 6-0-0 is there for your plants for the entirety of their growth cycle, throughout the entire growth cycle of a plant, regardless of vegetative or flowering cycles. This formula is comprised of a high quality Nitrogen and Calcium base, fortified with the micronutrients your plants need. Cutting Edge Solutions takes pride in the fact that their products contain no artificial growth regulators or hormones. Dyes are never added to recipes. The CES Base Family line was made to be simple and easy to use for beginner gardeners, while also being adaptable for advanced gardening techniques. The 3-PART is developed for use across a wide spectrum of water sources, as well as growing techniques from Deep Water Culture to good old fashioned soil. CES 3-Part is the base to healthy and happy plants. Guarenteed Analysis: Total Nitrogen (N) 6.0% 0.3% Ammoniacal Nitrogen 5.7% Nitrate Nitrogen Calcium (Ca) 5.0% Boron (B) 0.02% Iron (Fe) 0.1% Manganese (Mn) 0.05% Molybdenum (Mo) 0.0008% Derived from: Sodium Molybdate, Calcium Nitrate, Zinc Nitrate, Boric Acid, Calcium Carbonate, Manganese, EDTA, Iron EDDHA, and Iron DPTA. Commercial and small sizes available: 1 Quart 1 gallon 2.5 gallon 6 gallon 15 gallon 55 gallon barrel 270 gallon tote *Please expect a 2-week lead time on placing commercial-sized orders. Recirculating System Instructions Miro 6-0-0 Bloom 0-6-5 Grow 2-1-6 Clones & Seedlings (after roots) 5 ml/gal 5 ml/gal 10 ml/gal Vegetative Stages (1 – 2 weeks) 8 ml/gal 5 ml/gal 15-20 ml/gal Early Flowering Transition Stage (1 – 2 weeks) 8 ml/gal 15 ml/gal 5 ml/gal Full Bloom Fruiting Stage (5 – 10 weeks) 8 ml/gal 15-20 ml/gal none Flush Stage (5 – 10 days) 2.5 ml/gal 5 ml/gal none Soil Or Coco Instructions Miro 6-0-0 Bloom 0-6-5 Grow 2-1-6 Clones & Seedlings (after roots) 5 ml/gal 5 ml/gal 10 ml/gal Vegetative Stages (1 – 2 weeks) 5 ml/gal 5 ml/gal 10 ml/gal Early Flowering Transition Stage (1 – 2 weeks) 5 ml/gal 10 ml/gal 5 ml/gal Full Bloom Fruiting Stage (5 – 10 weeks) 5 ml/gal 15 ml/gal none Flush Stage (5 – 10 days) 4 ml/gal 10 ml/gal none Directions For Use: Micro 6-0-0™ is a highly concentrated nutrient solution. Never mix undiluted concentrates as this may result in nutrient lock-up. Add other nutrients separately to water and aerate reservoir regularly. Do not add additional Micro 6-0-0™ to a prepared reservoir. Shake well and measure carefully using a millilitre measuring cup. Mix Micro 6-0-0™ first into fresh water, stir well, then add other nutrients. After nutrients are mixed in water, adjust pH to 4.5-6.5. Monitor ppm and EC in reservoir and top off with fresh water as needed. Empty and refill tanks every 1-2 weeks. Reservoir water temperature should be 60-68 degrees F. Do not store product in direct sunlight. Do not freeze. Micro 6-0-0 is designed for use in hydroponics, soilless, continuous feed systems, drain to waste, and soil applications.