DAB DTRON2 Submersible Pump System – 1560 GPH

The DAB DTRON 2 is a powerful submersible pump that's perfect for various water applications. It's designed to be used in water wells, tanks, or cisterns, and it's ideal for residential buildings. With its 7" size, it can efficiently pressurize water, collect rainwater for reuse, and support gardening and irrigation needs. The pump comes with convenient features that make it user-friendly and reliable. The integrated pressure switch and flow switch, along with the electronic board, ensure automatic operation allowing the pump to turn on and off as needed. It also has dry running protection to prevent damage. Transporting and installing the pump is a breeze thanks to its double mechanical seal, non-return valve, and handle. These features make it easy to move around and set up. Plus, the innovative modular design allows for separate disassembly of the hydraulic part, motor, electrical part, and filter, making maintenance activities simple. It is also available in version X with 1" NPT Female inlet for connection to a floating suction hose to prevent the suction of impurities from the bottom. The entire pump is classified IP 68, with the DOC68 accessory (supplied separately) it becomes an IP 68 surface pump that can be used under the level of the water. On request a certified version for drinking water is available. The expansion vessel is integrated, no external expansion vessel is required. Additionally, the pump is equipped with NFC (Near Field Communication) pocket, which allows you to connect a float without compromising the watertight seal of the pump. CONSTRUCTION FEATURES OF THE PUMP Technopolymer pump body to resist corrosion and oxidation. Integrated check valve. Integrated debris filter. Overpressure valve to resist to the formation of ice in the piping and to protect from water hammer. On the pump body there is a air-vent valve that improves priming during the first installation or in the event of emptying the tank/well. Technopolymer handle to move the pump. Integrated 0,04 liter expansion vessel sized to prevent the pump from cycling in the event of small leakages and to compensate in case of water hammer. No maintenance or recharging is required for the integrated vessel. The coupling between the three impellers in technopolymer, the floating ring and the smoothing disc both in stainless steel allow a limited wear of the hydraulics. Suction height can be adjusted using the appropriate accessory (included): 1.4" - 1.6" - 2.4" or 3.2" (3.5 - 4 - 6 or 8 cm). CONSTRUCTION FEATURES OF THE MOTOR Asynchronous submersible water cooling motor. The hydraulic side of the motor shaft is in AISI 303 stainless steel. Double mechanical seal in oil chamber ensure the pump watertight. Capacitor and integrated anti-overheating motor for thermal protection. Quick coupling/release cable to facilitate installation inside tanks. Anti tear-off power cable connection. FEATURES OF THE ELECTRONIC The electronic operation allows the pump to start and stop autonomously by the system requirements and protects against the dry run. NFC (Near Field Communication) pocket for the use of a floater sensor (supplied separately) which can be connected without opening the pump and so maintaining a watertight seal. The ANTI-FLOOD protection intervenes in the event of a malfunction of the shutter. The ANTI-BURPING protection protects the pump from false starts in the event of gurgling water. DAB DTRON 2 Applications Pumping water from Rain Water storage tanks Pumping water from underground cisterns Pumping water from water storage tanks Pumping water from RO Water storage tanks Domestic Water pressurization Water pressurization for irrigation systems Specifications for the DAB DTRON 2 Model 45/90 35/120 Voltage / Frequency 115V / 60Hz Power 0.67 kW (1050W) 0.67 kW (950W) Horsepower 0.9 hp Amperage 9.7A 8.8A Maximum Head 134ft 146ft Maximum Flow Rate 26gpm 34gpm Maximum Immersion Depth 49ft (15m) Free Passage 0.08" (2mm) Minimum Suction Depth 4.33" (110mm) Minimum Level of Water 1.38" (35mm) Liquid Temperature Range From 32°F to 122°F Ambient Temperature Range <32°F to 122°F Set Cut-In 34.8 psi, 2.4 bar (+-0.2) Flanges/Thread 1.25" NPT Pump Maximum Diameter Diameter: 7.28" (185mm) Impeller Material Techno polymer/ AISI 304 stainless steel Maximum Number of Starts 60/h Non-Stop Service Yes Protection Class IP 68 Motor Insulation Class F Power Cable 49ft with plug Certifications NSF Certified Installation Type Fixed, horizontal or vertical. Submerged or semi-submerged. It can be installed on the surface, under the water level, or outside in a vertical position with the DOC68 accessory (sold separately). Voltage: 115 Volt Frequency: 60Hz Power: 0.67 kW (1050W) Horsepower: 0.9 hp Amperage: 9.7A Maximum Head: 134ft Maximum Flow Rate: 26gpm Maximum Immersion Depth: 49ft (15m) Free Passage: 0.08" (2mm) Minimum Suction Depth: 4.33" (110mm) Minimum Level of Water: 1.38" (35mm) Liquid Temperature Range: from 32°F to 122°F Ambient Temperature Range: <32°F to 122°F Set Cut-In: 34.8 psi, 2.4 bar (+-0.2) Flanges/Thread: 1.25" NPT Pump Maximum Diameter: 7.28" (185mm) Impeller/s Material: Techno polymer/ AISI 304 stainless steel Maximum Number of Starts: 60/h Non-Stop Service: yes Protection Class: IP 68 Motor Insulation Class: F Power Cable: 49ft with plug Certifications: NSF Certified Installation Type: Fixed, horizontal or vertical. Submerged or semi-submerged. It can be installed on the surface, under the water level, or outside in a vertical position with the DOC68 accessory (sold separately).