Dura-Bench Greenhouse Plastic Bench Tops – 2 ft. x 4 ft. - Non-Interlocking Non-Overlap

Dura-Bench Plastic Greenhouse Bench Top is a smoother and longer lasting growing surface for your plants. THESE HAVE A MINIMUM QUANTITY OF 5 (SOLD IN PACKS OF 10, MINIMUM PURCHASE OF 5 PACKS) Designed to replace traditional wood, wire, and expanded metal bench top, DURA-BENCH panels are made from durable, non-porous polypropylene plastic. The DURA-BENCH Plastic Greenhouse Bench Top eliminates problems like corrosion, rust, and sharp edges typically seen from expanded metal or wire tops. The panels will not crack, rot, or splinter like traditional wood products. In addition, the smooth panel allows trays, flats, and pots to slide across the surface with ease. DURA-BENCH Plastic Greenhouse Bench Top products are available in many different sizes and styles to fit your specific need. Durability Constructed from High Grade Plastic Material Extended Lifespan Reinforced Stress Points Superior Impact & Wear Resistance Performance Attached to Wood or Metal Frames Increased Airflow Easier Cleaning UV Protection Cost Effective Rot / Rust / Corrosion Proof Non-Porous / Moisture Resistant Light Weight / Rigid Designs No Rough Edges, Splinters DURA-BENCH Ultra Four Foot The DURA-BENCH ULTRA is 2′ wide by 4′ long panel with connections on all four sides. This flexible design allows for the creation of 1′ – 8′ wide benches. The DURABENCH ULTRA utilizes four nylon clips along the 4′ side allowing the parts to be adjoined. The 2′ side of the panel includes a four tab system that inserts into the opposite end connecting the parts together.* Size: 24" X 48" (60.96 cm x 121.92 cm) Surface Opening: 1.1" X 2.1" Rectangular Holes Weight: 4.5 lbs. (2.04kg) *Mounting Clips sold separately DURA-BENCH Original Four Foot – Interlocking, Non-Overlap The DURA-BENCH Original Non-Overlap is 2′ wide by 4′ long with interlocking tabs along the 4′ side. The Non-Overlap design is primarily used in 4′ wide benches where no connection is needed on the 2′ side of the panel. This design requires a support every 24" or 16". Size: 24" X 48" (60.96 cm x 121.92 cm) Surface Opening: 1.1" X 1.1" (2.79 x 2.79 cm) Square Holes Weight: 6.27 lbs. (2.84 kg) DURA-BENCH Original Four Foot – Interlocking, Overlap The DURA-BENCH Original Overlap design is 2′ wide by 4′ long panel with connections on all four sides. This design utilizes four interlocking tabs along the 4′ side allowing the parts to be adjoined. The 2′ side uses an overlap connection only requiring one cross support. This design requires a support every 24" or 16". Size: 24" X 49.5" (60.96 cm x 125.73 cm) Surface Opening: 1.1" X 1.1" Rectangular Holes Weight: 6.52 lbs. (2.96 kg) DURA-BENCH Original Five Foot – Non-Interlocking, Non-Overlap The DURA-BENCH 5′ design is 2′ wide by 5′ long. All four sides of the DURA-BENCH 5′ Bench Top sit flush against the adjacent panel. This design offers the flexibility of a 5′ wide bench where no connection is needed. This design requires a support every 20″. Designed for speed of installation Size: 24" X 60.25" (60.96 cm x 153.035 cm) Surface Opening: 1.1" X 1.1" (2.79 x 2.79 cm) Square Holes Weight: 7.52 lbs. (3.42 kg) DURA-BENCH Original Four Foot – Non-Interlocking, Non-Overlap The Dura-Bench 4′ design is 2′ wide by 4′ long. All four sides of the DURA-BENCH 4′ sections sit flush against the adjacent panel. This design requires a support every 24″ or 16″. Designed for speed of installation. Size: 24" X 48" (61.28 cm x 121.92 cm) Surface Opening: 1.1″ X 1.1″ (2.79 x 2.79 cm) Square Holes Weight: 5.93 lbs. (2.69 kg)