J&D Manufacturing Typhoon Galvanized Slant Exhaust Fan – 24" - 4784 CFM (Direct Drive, 115/230 Volt, 1/2HP, Single Phase, With Cone, 3 Blade Aluminum

The Typhoon slant wall exhaust fan from J&D Manufacturing has a heavy gauge galvanized housing and X-frame motor mount to provide a solid structure. Typhoon fans include an aluminum shutter with tie bar and galvanized shutter clips to hold the shutter tight to the frame for less vibration. With a quick twist of the clips, the shutter can be removed for easy cleaning and maintenance. Typhoons are designed for exceptional performance, low maintenance and low operating cost for your agricultural, horticultural or industrial application. Typhoon Exhaust Fan Features: Heavy duty 18 gauge galvanized housing Smooth spun venturi to maximize airflow Rugged X-frame motor mount for stability and quiet operation Available with or without a performance boosting cone No cone models include a 1" x 2" wire mesh guard that is hot dip galvanized after welding for superior corrosion resistance and is attached with plastic guard clips to reduce noise and vibration Cone models include a hot dip galvanized safety cone guard Optional 1/2" x 1" guard available to mount on the intake side to meet OSHA requirements (allowing safe fan installation at any height) Ships fully assembled except shutter and/or cone 3, 4, or 6 blade galvanized or 3 blade cast aluminum props Lifetime Warranty on 3 blade cast aluminum props, available on select 50" models Spring belt tensioning system on all belt drive models Two speed and variable speed motors available on select models (variable speed requires separate speed control) Shaft bearings are pre-lubricated, permanently sealed and rubber mounted with an eccentric locking double set screw collar for smooth operation, and are covered by a 3 Year Warranty Totally enclosed, maintenance-free, high-efficiency motors have completely sealed ball bearings, and are covered by a 2 Year Warranty Fan Size Rough Opening Recommended Side By Side OC Dimension for Fans with Cone 24" 31" W x 32" H 34"+ 30" 37" W x 38 1/2" H 40"+ 36" 41" W x 42 3/4" H 46"+ 42" 49 1/4" W x 51" H 53"+ 50" 55" W x 57" H 60"+ Applications: Dairy, Greenhouse, Industrial, Poultry J&D Manufacturing Typhoon Exhaust Fan Spec Table SKU Fan Size CFM Voltage Phase Amps VNS36S 36" 8,085 115/230 Single 6.6/3.3A VFS36CS1 36" 12,995 115/230 Single 9.0/4.5A VNS50S 50" 18,279 115/230 Single 9.0/4.5A VNS50S3 50" 18,390 230/460 Three 3.2/1.6A VFS503CSCA 50" 19,397 230/460 Three 3.2/1.6A VFS50CS 50" 19,785 115/230 Single 9.0/4.5A SKU Hz HP RPM Cone Prop Type VNS36S 60 1 565 No Cone 4 Blade Galvanized VFS36CS1 60 1 737 With Cone 4 Blade Galvanized VNS50S 60 1 592 No Cone 3 Blade Galvanized VNS50S3 60 1 588 No Cone 3 Blade Galvanized VFS503CSCA 60 1 591 With Cone 3 Blade Cast Aluminum VFS50CS 60 1 591 With Cone 3 Blade Galvanized