Netafim Series 80 Globe Control Valve – 3/4 Inch / 24VDC

Netafim Series 80 Nylon Control 2-Way Valve Lower Friction = Improved Performance With lower friction loss providing improved performance, Netafim Series 80 Nylon Control Valves are specifically designed for greenhouse applications. Offered with a nylon body (which is durable and corrosion-resistant), 2-Way or 3-Way electric solenoid and globe or angle configurations. These valves have a quick reaction to opening and closing which is ideal for mist systems. The low inrush and holding currents allows longer wire runs from valve to controller. A new drip-tight diaphragm provides a tight seal. Flow control stem allows manual control and the simple inline installation requires minimal maintenance with maximum dependability. Product Advantages Proven Reliability with Reclaimed Water: Over a decade of field-proven, consistent performance under the harshest water conditions. Durable and corrosion-resistant materials. 2-Wire System Compatibility: Works with all major manufacturer 2-Wire control systems. Flow control stem allows manual control from full closure up to maximum capacity Suitable for dirty water applications with clog-free labyrinth inlet for command water. Quick reaction to opening and closing and a drip-tight seal for accurate irrigation. Available in multiple body configurations and control functions. Very low friction loss allows valve use with a wider range of flows. Durable, corrosion resistant materials for long life. Applications Residential or commercial landscape irrigation applications For mild corrosive and mild acidity levels in the water For remote control, master valve, automated operations Reclaimed/reuse applications including municipally treated reclaimed water designated for irrigation Specifications Recommended flow range: 3/4” – 0.01 to 26 GPM 1” – 0.01 to 44 GPM 1 1/2” – 0.25 to 110 GPM 2“ – 0.25 to 176 GPM Minimum operating pressure: 7 psi Maximum operating pressure: 150 psi Water temperature: up to 140° F Improved manual selector and encapsulated solenoid available on 3/4” and 1“ models only 24VAC solenoid standard +/- 10% voltage Solenoid inrush current: 0.220A Solenoid holding current: 0.095A Optional Solenoids: 24VDC, 12VDC, 12VDC-latching and 120VAC Integral stainless steel EasyClean® filter for 1.5” and 2” models only Adjustable pressure regulator option available: 1.5″ and 2″ model Normally Closed Option: 3/4″ – 2″ Normally Open Option: 1 1/2″ – 2″