Out of Stock
Netafim Techline EZ Dripline – 6 in. / 0.26 GPH - 500 ft. Coil
☆☆☆☆☆
$139.35
Techline™ EZ
Ideal for small and medium areas, Techline™ EZ offer one coil, two fittings and less than one-hour installation. It's the simplest solution for small sites.
Purchase directly from HydroBuilderTechline™ EZ
Ideal for small and medium areas, Techline™ EZ offer one coil, two fittings and less than one-hour installation. It's the simplest solution for small sites. Netafim's Techline™ EZ is the 12mm dripline for on-surface looped systems that installs fast, saves water and "disappears" into the landscape.
Why Techline™ EZ?
The first anti-siphon emitter in Landscape dripline, successfully used in harsh agricultural applications before its introduction into Landscape. The emitter is pressure compensating and continuous flushing, the anti-siphon feature prevents ingestion of debris into the tubing caused by vacuum.
Laser Etched, For Easy Identification
Made With Post-Consumer Recycled Material
Qualifies for Use on Leed Projects
UV Resistant Tubing
Self-Contained, One-Piece Dripline Construction
Product Advantages
Less Visually Obtrusive
12mm diameter tubing is less noticeable in landscape installations.
Self-Contained, One-Piece Dripline Construction
Assures reliable, easy installation.
Flexible UV Resistant Tubing
Adapts to any planting area shape – tubing curves at a 6″ radius. On-surface installations withstand heat and direct sun.
More Cost-Effective in Smaller Bed Areas
24% smaller diameter tubing.
Applications
Subsurface or on-surface installations
Bed areas that require shorter lateral lengths
Areas subject to vandalism
Planting areas
Curved, narrow, and angular planting areas
Flower beds, trees, and shrubs
Rooftop gardens
Vegetable gardens
Green walls
High traffic or high liability areas
Raised planters
Specifications
Emitter flow rates: 0.26, 0.4, 0.6 and 0.9 GPH
Emitter spacings: 6″, 12″, and 18″
(6″ available for 0.26 and 0.4 GPH only)
Uses 12mm Netafim Insert Fittings or any compression fitting for 0.426″ diameter tubing
Pressure compensation range: 6 to 58 psi
Bending radius: 6″
Maximum system pressure: 58 psi
Minimum pressure required: 6 psi
Tubing diameter: .510″ O.D.; .426″ I.D.
Coil length: 200′, 250′, 300′, 500′, 1,000′
Recommended minimum filtration: 120 mesh
Diaphragm made of silicon′
ISO 9261 Standard Compliance






