Trimpro Trimbox – 7/16" Slot Grate - (Standard)

High Quality Design For Smaller Producers Looking For A Professional Grade End Product The Trimbox is designed for smaller producers, built on the same principles as the Trimpro Original. Easily mounted on any workbench with brackets & clamps (included), the lightweight Trimbox is very efficient and provides impressive results. For trimming, take a branch of a freshly harvested plant in your hand and move it over the grate with a back-and-forth motion while rotating the plant at the same time. *For Wet Trimming Only* - All Trimpro Trimmers are designed to be used with wet product only. If used with dry product damage may occur. If you need to trim dry, view our dry trimmers here . Manual Control For trimming, take a branch of a freshly harvested plant in your hand and move it over the grate with a back-and-forth motion while rotating the plant at the same time. Its tempered steel blade makes a clean cut without damaging the plant. If you would prefer to have the flowers circulated by air, take a look at the Trimpro Automatik series which utilizes a fan and vacuumm to move the flowers over the grate and blade. Or check out the Trimpro Rotor series that utilizes robotic touch manipulation of the folowers to speed up trimming time. Easy to Use The Trimpro Trimbox is easy to use while standing or sitting and gives you tons of control over the end product. By adjusting the blade and the way you manipulate the flowers over the grate you can trim to your desired level and speed. All trimmings are collected for easy disposal or processing in a mesh bag. Easy to Maintain The blade assembly can be easily removed for sharpening to ensure you always get the cleanest cut. Cleaning the non-stick grate is a breeze. Just spray the grate and blade with isopropyl alcohol between uses to ensure a clean and sharp cut. The unit is easy to disassemble and replacement parts are available here on Hydrobuilder.com. Specs Dimensions Machine: 8.6" (diameter) x 9.2" Packaging: 9.6" x 10" x 12.4" Grate Size Options Large slots only (Standard): 7/16" Small slots only (Special Order): 1/4" Materials Cylinder material: PVC Grate material: Aluminium Weight Approximated Weight: 11 lbs Trimpro offers a full line of trimming machines of various types and sizes: Robotic Touch Trimmers: - Trimpro Unplugged - Trimpro Rotor - Trimpro Rotor XL - Trimpro Rotor with Workstation - Trimpro Dyrpro Dry Trimmer Manual Control Trimmers: - Trimpro Trimbox - Trimpro Original - Trimpro Workstation - Trimpro Trimbox with Workstation Airflow Trimmers - Trimpro Automatik - Trimpro Automatik XL General Warnings: Never place your fingers, gloves or any other body part in contact with the grate or the blade. Never apply pressure on the grate. Do not use scissors, knives or any instrument above the grate. Safety glasses and gloves are required at all time. The gloves have to be tight enough so they don't get inside the grate slots. A loose glove is dangerous. BE AWARE! The manufacturer does not accept any responsibility for damages caused to or by the trimmers resulting from an inadequate use or assembly. Use the trimmers in accordance with existing laws and regulations.