API Phosphate Test Kit

Phosphate can enter your aquarium through tap water, fish waste, and decaying organics such as uneaten food and dead algae. Excess phosphate contributes to unsightly algae and green water blooms, and in saltwater, excess phosphate can inhibit the growth of hard corals. The API PHOSPHATE TEST KIT tests phosphate levels from 0 to 10 ppm so that you can easily monitor the condition of your aquarium water and may be used in both fresh and saltwater aquariums. Sizes Contains 150 tests and includes 2 test solutions, easy-to-ready instructions, test tube and 2 color charts FAQs For what type of tank is API PHOSPHATE TEST KIT most appropriate? Why should I test for phosphate? Phosphate enters your aquarium through fish and invertebrate waste, and excess phosphate can cause problematic conditions in your tank. Use the API PHOSPHATE TEST KIT to test for high phosphate levels weekly. It may be used for both marine (saltwater) and freshwater aquariums. How do I care for and clean my test tubes? Once the test has completed, it is important to rinse the test tube with water right away so that the contents don’t stay in the test tube. This will make sure that the reagents don’t cause anything to stick to the sides of the test tube, which could cause staining over time. Simply run the water, open the test tube gently (do not twist the cap), and allow the water to dilute and rinse the contents out of the test tube. Avoid getting the contents of the test tube on your skin. If you find that you have forgotten reagent within your test tube for a long period and the color is sticking to the tube, you are able to use a small bottle brush (and some API Safe & Easy cleaning spray) to gently wash the inside of the tube. Avoid the use of soap, as soap residue could be introduced back into the aquarium when filling the test tube at next use, which is something that could be harmful to your fish. Replacement test tubes are also available for purchase from online retailers, should you need additional test tubes. How hard do I shake the test tube when performing the tests? While it is important to shake the indicated reagent bottles very vigorously, you should be gentler when shaking the test tubes during testing. Before shaking, make sure that the cap is closed tight. Place a finger or thumb on top of the cap, to make sure it cannot come undone during use. The goal of this shaking step is to mix the contents of the tube together and this can be accomplished by simply inverting the test tube, back and forth every 1-2 seconds, for the indicated amount of time. Add to Wishlist Add to Wishlist